Logo - CCME
Banner Main – Digital Issue

ASHRAE releases revised version of Data Center Standard

ANSI/ASHRAE Standard 90.4-2019 establishes the minimum energy-efficiency requirements for the design and operation of data centres, with special consideration to their unique load requirements compared to other buildings

| | Dec 16, 2019 | 3:33 pm
Share this story

ATLANTA, Georgia, United States, 11 December 11, 2019: ASHRAE has released a revised version of its energy standard for data centres, the Society said through a Press release.

ANSI/ASHRAE Standard 90.4-2019, Energy Standard for Data Centers, establishes the minimum energy-efficiency requirements for the design and operation of data centres, with special consideration to their unique load requirements compared to other buildings, the Society said. Standard 90.4 applies to data centres with a conditioned floor area greater than 20 W/ft2 and IT equipment loads greater than 10 kW and contains specific requirements for mechanical and electrical systems installed in new data centers or in data centre additions/alterations that require new mechanical or electrical systems, the Society added.

“Standard 90.4 was developed under the guiding principle that data centers are mission-critical facilities that demand careful attention to the potential impact of requirements,” said Richard Zbin, Chair, Standard 90.4 Committee. “The updated standard enables operators and designers to use the latest and most effective equipment and techniques to achieve energy efficiency in data centers, while avoiding potential reliability issues.”

According to the release, updates of the Standard ensure…

  • Renumbered sections and revised wording align more closely with that of Standard 90.1.
  • Mechanical efficiency requirements are based entirely on yearly energy calculations and no longer include a power calculation option. Included table values are also aligned with the newest ASHRAE Climate Zones.
  • Significant improvements are made to uninterruptible power supply (UPS) technology. Mechanical and electrical infrastructure elements are addressed. Updated UPS segment tables reflect available hardware, and average outputs are also included.

According to the release, Standard 90.4 has been in a continuous state of development as a code-intended companion to Standard 90.1 since 2013. The standard requires compliance with Standard 90.1 for building envelope, service water heating, lighting and other equipment.


Share this story

Feedback for this story

Your email address will not be published. Required fields are marked *

FaceArmor Masks
Honeywell
Banner – Bitzer (17jan19)
Banner – Midea (12-17)
Banner - CCGD
Banner - AHRI
Banner – Matrix AVE
Banner – CareersBay