Logo - CCME
Banner Main – Digital Issue

Why temporary cooling towers in the Middle East?

Arguing that cooling towers are prone to troubles that can throw an entire plant into turmoil, or worse, shut it down altogether, Daniel B Coday lists the benefits of temporary cooling towers and makes a case for them in the region.

| | Mar 8, 2014 | 9:49 am
Share this story

Arguing that cooling towers are prone to troubles that can throw an entire plant into turmoil, or worse, shut it down altogether, Daniel B Coday lists the benefits of temporary cooling towers and makes a case for them in the region.

mar2014-persp01The thermal performance and capacity of an evaporative cooling tower tends to decrease over time. At the same time, a plant’s need for colder water tends to grow. Couple these factors with today’s stringent capital constraints and the challenge of expanding an existing cooling tower’s footprint, and one quickly sees why industrial plants of all shapes and sizes limp along for years with insufficient cold water, especially during high-demand times and during the hot summer months. It is a rare thing indeed to find an industrial plant that doesn’t need more cold water than its existing towers can supply.

Worst case scenarios

Catastrophic failure afflicts more cooling towers than is commonly known. Several factors contribute to failure. Towers containing corrosive materials fail decisively at the most inconvenient moments, especially when they are located near the ocean and at low latitudes, where salt and ultraviolet light wreak havoc. Collapse comes at the hand of a strong wind, or fire, earthquake, poor maintenance, and, in extreme northern climates, when ice accumulates in the fill media and air inlet louvres. When a cooling tower comes down, some or all of the plant that it serves also comes down. Catastrophe visits to cooling towers more than most other industrial equipment.

mar2014-persp02

Advantages of temporary cooling towers

In addtion to load replacement following a failure of an existing tower, augmentation of an existing tower and avoidance of maintenance outages, below are some advantages afforded by temporary cooling towers:

Reduction of thermal pollution:

Many large processes use once-through cooling using water from lakes, rivers or oceans to cool their process before returning warm water to the lake, river or ocean. The resulting algae blooms pose a grave threat to the natural ecosystem and aquatic life. Environmental agencies are imposing ever stricter regulations on discharge temperatures. A temporary cooling tower helps ensure that the process is able to run at capacity year-round by cooling the process water before it flows back into the lake, river or ocean.

mar2014-persp03Compensating for a lack of cap-ex funding:

A new permanent cooling tower requires a capital expenditure that can be difficult, if not impossible, to obtain, especially on short notice. Temporary cooling towers are an expense of the O&M budget and, as such, can sometimes enable a plant to avoid an exhaustive cap-ex approval process.

Satisfying short-term cold water requirements:

Delays in delivery of new equipment, short-term testing of new equipment and other short-term events, such as the Olympics, World Expo and World Cup, can all be assuaged by temporary cooling towers.

Option for DC plants:

Some plants are designed with excess cooling tower capacity (n+1) to minimise downtime and its associated costs. However, for a District Cooling plant, the n+1 approach increases initial cap-ex requirements, grows plant size and civil costs and even increases the real estate requirement, since the size of most District Cooling plants is dictated by the space requirements of the cooling towers installed atop their buildings. Temporary cooling towers, on the other hand, give District Cooling plant designers another option if the n+1 approach negatively impacts a new plant’s economic feasibility.

Value addition with temporary cooling towers:

Temporary cooling tower companies usually design the temporary equipment layout and supply the cooling towers, pumps and pump controls, piping, tower motor controls, and installation and removal services. They focus on providing value-added service to customers that are usually simultaneously dealing with myriad other business issues, especially during an emergency. Temporary cooling tower equipment is typically supplied for a minimum term of three months, although many temporary installations remain for much longer, sometimes many years. Routine maintenance of the temporary equipment is performed by the temporary equipment supplier.

A case for cooling towers in the region

Despite an ever-growing base of large, already impaired, permanent cooling towers serving life sustaining and other critical operations in coastal regions throughout the Middle East, there are very few temporary cooling towers available in the region. By contrast, North America has more than one million TR of temporary cooling towers, all of which experience heavy utilisation, with many deployed on a year-round or multi-year basis.


Share this story

Feedback for this story

One comment on “Why temporary cooling towers in the Middle East?”

  1. Adam Read says:

    Aggreko have a range of temporary cooling towers available for short or long term rental within the Middle East.

    Please see our website for more details.

Leave a Reply to Adam Read Cancel reply

Your email address will not be published. Required fields are marked *